Configuration Of Uart2, Uart3 - Fujitsu MB90390 Series Hardware Manual

Table of Contents

Advertisement

CHAPTER 20 UART2, UART3
20.2

Configuration of UART2, UART3

This section provides a short overview on the building blocks of UART2, UART3.
■ Block Diagram of UART2, UART3
UART2, UART3 consists of the following blocks:
• Reload Counter
• Reception Control Circuit
• Reception Shift Register
• Reception Data Register (RDR2/RDR3)
• Transmission Control Circuit
• Transmission Shift Register
• Transmission Data Register (TDR2/TDR3)
• Error Detection Circuit
• Oversampling Unit
• Interrupt Generation Circuit
• LIN Synch Break/Synch Field Detection
• LIN Synch Break Generation Circuit
• Bus Idle Detection Circuit
• LIN-UART3 Serial Mode Register (SMR2/SMR3)
• Serial Control Register (SCR2/SCR3)
• Serial Status Register (SSR2/SSR3)
• Extended Communication Control Register. (ECCR2/ECCR3)
• Extended Status/Control Register. (ESCR2/ESCR3)
342

Advertisement

Table of Contents
loading

Table of Contents