Table of Contents
Advertisement
■ Sample Output Waveform when CMOD[1:0] = 11
When CMOD[1:0] = 11
2 or 3 (4, 6 or 7). For the pin OUT1 (OUT5), this setting is identical to CMOD[1:0] = 01
13.4-3).
OUT0: The level is only reversed by a match with compare register 0.
OUT1: The level is reversed by a match with compare register 0 or with compare register 1.
OUT2: The level is reversed by a match with compare register 0 or with compare register 2.
OUT3: The level is reversed by a match with compare register 0, compare register 2 or with compare
For OUT4, OUT5, OUT6 and OUT7, compare register 4 plays the same role as compare register 0 above.
Figure 13.4-10 Output Waveform when OCS1:CMOD[1:0] = 11
Counter value
FFFF
H
BFFF
H
7FFF
H
3FFF
H
0000
H
Reset
OCCP0 value
OCCP1 value
OCCP2 value
OCCP3 value
OUT0
OUT1
OUT2
OUT3
Note: In this figure, the initial value is "0" for all pins. Timer reset is by match with compare register 0.
, the output level of the OUT3 (OUT7) pin is reversed by the compare registers 0,
B
register 3.
B
B
BFFF
H
7FFF
H
3FFF
H
5FFF
H
CHAPTER 13 16-BIT I/O TIMER
B
and OCS3:CMOD[1:0] = 11
Time
(see also Table
B
213
Advertisement
Table of Contents
