Fujitsu MB90390 Series Hardware Manual page 337

;-----Interrupt program----------------------------------------------------------
ED_INT1:
MOV I:ADCS1,#80H
RETI
CODE ENDS
;-----Vector setting-------------------------------------------------------------
VECT CSEG ABS=0FFH
ORG 0FFB4H
DSL ED_INT1
ORG 0FFDCH
DSL START
DB 00H
VECT ENDS
END START
CHAPTER 18 8/10-BIT A/D CONVERTER
;Does not stop A/D conversion. Clears and disables
;the interrupt flag.
;Returns from interrupt.
;Sets vector for interrupt #18 (12
;Sets reset vector.
;Sets single-chip mode.
).
H
309