Size Actuator, And Exit Sensor Actuator - Xerox DocuPrint P1202 Service Manual

REP 4.3.2 Paper Out Actuator, Paper Feed / Registration Actuator, Paper

Size Actuator, and Exit Sensor Actuator

Removal
1 Disconnect the AC Power Cord and remove the Paper Tray.
2 Remove the Printer Cartridge (REP 4.5.1).
3 Remove the System Controller PWB (REP 4.6.2).
4 Remove the Control Panel Harness Cover (REP 4.1.2).
5 Disconnect the Control Panel Harness from J1 on the Control Panel.
6 Remove the Main Cover (REP 4.1.3).
7 Remove the Engine PWB (REP 4.6.1).
8 Remove the desired actuator by gently squeezing the sides of the actuator (Figure 4.3.2a)
Paper Size
Actuator
Paper Out
Actuator
Paper Feed/
Registration
Actuator
Replacement
1 Assemble in reverse order.
2 Verify proper operation.
3
Repair Procedures
Figure 4.3.2a. Paper Empty Sensor Removal.
3/99
www.printcopy.info
4-18
Exit Sensor
Actuator
egl_427a
Xerox DocuPrint P1202 Service Manual
Printer
Bottom
View