Rep 12.56 Professional Finisher Booklet Stapler; Rep 12.57 Finisher Compiler Tray - Xerox Phaser 7760 Service Manual

REP 12.56 Professional Finisher Booklet Stapler

Parts List on PL 21.16
Removal
1. If the Booklet Maker Unit has been removed from the Finisher
step 4.
2. Open the Front Door.
3. Pull out the Booklet Maker Unit.
4. Removing the Booklet Stapler (Figure
a. Pull out the Booklet Stapler.
b. Remove the 2 screws on the left Rail.
c. Push in the Stopper on the right Rail.
d. Remove the Booklet Stapler.
Figure 1 Removing the Booklet Stapler
Revised
Phaser 7760 Color Laser Printer
(REP 12.55), go to step
1).

REP 12.57 Finisher Compiler Tray

Parts List on PL 21.8
Removal
1. Remove the Rear Upper Cover
2. Remove the Front Door (REP
NOTE: Ensure to use a stubby screwdriver for the next step.
3. Remove 1 screw securing the Compiler Tray
Figure 1 Removing Screw Securing the Compiler Tray
4. Remove the Stapler Assembly
5. Remove the Inner Cover (REP
January 2010
4-77
(REP 12.41).
12.40).
(Figure 1).
(REP 12.53).
12.48).
Repairs and Adjustments
REP 12.56, REP 12.57