Rep 4.12 Exit Sensor - Xerox B210 Service Manual

4. Remove two screws securing the top of the Manual Paper Tray, then remove the Manual
Paper Tray, Figure 2.
Figure 2 Manual Paper Tray Top Screws (Top View)
Replacement
Replacement is the reverse of the removal procedure.
Repairs - Adjustments
REP 4.11, REP 4.12
Screws

REP 4.12 Exit Sensor

Parts List on PL 4.1
Removal
1. Switch off the machine, then disconnect the power cord.
2. Remove the Left and Right Side Covers,
3. Remove the Rear Cover, REP
4. Remove the Fuser, REP 5.1.
5. Release the latch on the underside of the frame to release the Exit Sensor Mounting Plate
from the frame, Figure 1.
Figure 1 Exit Sensor Plate Latch Release (Bottom View)
July 2019
4-30
REP 2.2.
2.3.
Latch
Xerox® B210 Service Manual
Initial Release