Pump Overhaul - Honda 2004 Odyssey Service Manual

Pump Overhaul

Exploded View
Replace the pump as an assembly if the parts indicated with asterisk (*) are worn or damage.
*PUMP CAM RING
Install the cam ring
with its ''•'' mark facing
toward the pump cover.
*SIDE PLATE
15.2 x 2.4 mm O-RING
Replace.
*PUMP DRIVE SHAFT
PULLEY
PULLEY NUT
64 N·m (6.5 kgf·m, 47 lbf·ft)
4.5 mm ROLL PIN
*OUTER SIDE PLATE
* PUMP VANES
(10 plates)
*PUMP ROTOR
*SNAP RING
*SUBVALVE
PUMP SEAL SPACER
PUMP SEAL
Replace.
*PUMP HOUSING
BALL BEARING
40 mm SNAP RING
FLANGE BOLTS
20 N·m (2.0 kgf·m, 14 lbf·ft)
*PUMP COVER
5 mm ROLL PIN
PUMP COVER SEAL
Replace.
51 x 2.4 mm O-RING
Replace.
13 x 1.9 mm O-RING
Replace.
INLET JOINT
FLANGE BOLTS
11 N·m (1.1 kgf·m,
8.0 lbf·ft)
*FLOW CONTROL VALVE
*SPRING
16.7 x 1.8 mm O-RING
Replace.
* FLOW CONTROL VALVE CAP
49 N·m (5.0 kgf·m, 36 lbf·ft)
(cont'd)
17-17