Honda 2004 Odyssey Service Manual page 1592

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

8. To complete the charts:

• Mark the delivery temperature along the vertical line.

• Mark the intake temperature (ambient air temperature) along the bottom line.

• Draw a line straight up from the air temperature to the humidity.

• Mark a point 10 % above and 10 % below the humidity level.

• From each point, draw a horizontal line across the delivery temperature.

• The delivery temperature should fall between the 2 lines.

• Complete the low-side pressure test and high-side pressure test in the same way.

• Any measurements outside the line may indicate the need for further inspection.

Example Intake temperature (dry):

Intake temperature (wet):

Intake pressure:

Delivery temperature:

Delivery pressure:

Within normal range

INTAKE TEMPERATURE

86°F (30°C) Humidity level 70 %

77.9°F (25.5°C)

360 kPa (3.67 kgf/cm ) (52.2 psi)

67.3°F (19.6°C)

2295 kPa (23.4 kgf/cm ) (332.8 psi)

Single A/C :

INTAKE TEMPERATURE

Chapters

Table of Contents