Clutch Inspection - Honda 2004 Odyssey Service Manual

Clutch Inspection

1st/1st-hold/2nd Clutch
1. Inspect the clutch piston and clutch piston check valve. If the clutch check valve is loose or stuck damaged, replace
the clutch piston.
2. Check the spring retainer for wear and damage.
3. Inspect the clutch discs, clutch plates, and clutch end plate for wear, damage, and discoloration.
• If the clutch discs are worn or damaged, replace the discs as a set.
• If the clutch plates are worn, damaged, or discolored, replace the plates as a set.
• If the clutch end plate is worn, damaged, or discolored, inspect the clutch end-plate-to-top-disc clearance, then
replace the clutch-end-plate.
• If the 1st-hold clutch plate B is worn, damaged, or discoloration, inspect the 1st-hold clutch plate B-to-top-disc
clearance, then replace plate B.
O-RINGS
Replace.
CHECK VALVE
CHECK VALVE
CLUTCH PLATES,
Five Plates
Standard thickness:
1.6 mm (0.063 in.)
CLUTCH DISCS,
Five Discs
Standard thickness:
1.94 mm (0.076 in.)
CLUTCH END PLATE
SNAP RING
1ST CLUTCH
PISTON
O-RINGS
Replace.
1ST-HOLD
CLUTCH PISTON
RETURN SPRING
SPRING RETAINER
SNAP RING
CLUTCH PLATES,
Three Plates
Standard thickness:
1.8 mm (0.071 in.)
CLUTCH DISCS,
Three Discs
Standard thickness:
1.94 mm (0.076 in.)
1ST-HOLD
CLUTCH
PLATE B
CHECK VALVE
DISC SPRING
SNAP RING
CLUTCH END PLATE
CLUTCH DISCS,
Six Discs
Standard thickness:
1.94 mm (0.076 in.)
CLUTCH PLATES,
Six Plates
Standard thickness:
1.6 mm (0.063 in.)
SNAP RING
SPRING RETAINER
RETURN SPRING
2ND CLUTCH PISTON
O-RINGS
Replace.
2ND CLUTCH DRUM
1ST/1ST-HOLD CLUTCH
DRUM
(cont'd)
14-455