Torque Converter Clutch Solenoid Valve Test; Torque Converter Clutch Solenoid Valve Replacement - Honda 2004 Odyssey Service Manual

Torque Converter Clutch Solenoid
Valve Test
1. Disconnect the connector from the torque
converter clutch solenoid valve.
2. Measure torque converter clutch solenoid valve
resistance at the solenoid valve connector (black).
Standard: 12 25
3. Replace torque converter clutch solenoid valve if
the resistance is out of standard.
4. If the resistance is within the standard, connect the
No. 2 terminal of the torque converter clutch
solenoid valve connector to the battery positive
terminal, and connect the No. 1 terminal to the
battery negative terminal. A clicking sound should
be heard.
Replace torque converter clutch solenoid valve if
no clicking sound is heard.
Torque Converter Clutch Solenoid
Valve Replacement
1. Remove the mounting bolt and torque converter
clutch solenoid valve.
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
2. Install a new torque converter clutch solenoid valve
(A) with new O-rings (B). When installing the
solenoid valve, do not allow dust or other foreign
particles to enter the transmission.
3. Check the connector for rust, dirt, or oil, then
reconnect it.
A
B
14-357 14-357