Exterior Trim
Side Sill Panel Replacement
1. Remove the side sill panel.
–1 If equipped, remove the front splash guard (A).
–2 Pull the inner fender (B) back as necessary.
–3 Slide the side sill panel (C) forward and remove it. Side clips (D) will stay in the body.
–4 Remove the side clips from the body.
Fastener Locations
: Screw, 4
D
D
A
2. Replace any damaged clips.
3. Install the side clips on the side sill panel.
4. Hold the panel up, and fit all the side clips into the holes in the body, then push on the panel until the clips snap
into place.
5. Reinstall the inner fender and front splash guard (if equipped).
20-148
: Clip, 15
D
B
D
D
D
D
D
C
D