Front Door Panel Removal/Installation - Honda 2004 Odyssey Service Manual

Front Door Panel Removal/Installation

Special Tools Required
Trim pad remover, Snap-on A177A, or equivalent,
commercially available.
1. Remove the mirror mount cover, power mirror (see
step 2 on page 20-33), manual mirror (see step 2 on
page 20-34). Take care not to scratch the door panel.
2. Remove the inner handle (A). Take care not to
scratch the door panel.
–1 Pry out the cap (B), and remove the screw.
–2 Pull the inner handle forward and out half-way.
–3 Disconnect the inner handle rod (C) and power
door lock switch connector (D) (for some
models).
Fastener Location
: Screw, 1
D
C
C
3. Detach the clips and hooks (A), then remove the
speaker grille (B). Remove the screws.
Fastener Locations
: Screw, 3 : Clip, 2
B
A
B
A
4. Remove the pull pocket panel (A). Take care not to
scratch the door panel.
–1 Pry out the cap (B), and remove the screw.
–2 Release the hook (C), and disconnect the power
window switch connectors (D).
Driver's
Fastener Location
: Screw, 1
A
B
C
D
(cont'd)
20-7