Honda 2004 Odyssey Service Manual page 710

8. Disconnect the mainshaft speed sensor connector
(2P).
9. Check for continuity between PCM connector
terminal C7 and the No. 1 terminal of the mainshaft
speed sensor connector.
PCM CONNECTOR C (22P)
NM (RED)
RED
Wire side of female terminals
Is there continuity?
YES Go to step 10.
NO Repair open in the wire between PCM
connector terminal C7 and the mainshaft speed
sensor.
MAINSHAFT SPEED
SENSOR CONNECTOR
10. Check for continuity between PCM connector
terminal C6 and the No. 2 terminal of the mainshaft
speed sensor connector.
PCM CONNECTOR C (22P)
NM SG (WHT)
Wire side of female terminals
Is there continuity?
YES Check for loose terminal fit in the PCM
connectors. If necessary, substitute a known-good
PCM and recheck.
NO Repair open in the wire between PCM
connector terminal C6 and the mainshaft speed
sensor.
MAINSHAFT SPEED
SENSOR CONNECTOR
WHT
14-97