Glove Box Removal/Installation - Honda 2004 Odyssey Service Manual

Glove Box Removal/Installation

SRS components are located in this area. Review the
SRS component locations, '99-01 models (see page 23-
18), '02 model (see page 23-19), '03-04 models (see
page 23-20), and the precautions and procedures (see
page 23-21) before performing repairs or service.
NOTE:
• Take care not to scratch the dashboard and related
parts.
• If the glove box swings down without any support,
the hinges can be overextended and damaged. To
prevent damage to the glove box hinge, use a piece
of foam or a bundle of shop towels to support it.
1. While holding the glove box (A), remove the glove
box stop (B) on each side.
B
2. Remove the bolts, then remove the glove box (A).
Fastener Locations
3. Install the glove box in the reverse order of
removal.
A
: Bolt, 2
5 x 0.8 mm
9 N·m
(0.9 kgf·m,
7 lbf·ft)
A
20-71