Front Seat Removal/Installation - Honda 2004 Odyssey Service Manual

Front Seat Removal/Installation

For '02-04 models: SRS components are located in this
area. Review the SRS component locations, '02 model
(see page 23-19), '03-04 models (see page 23-20), and
the precautions and procedures (see page 23-21) before
performing repairs or service.
NOTE:
• When prying with a flat-tip screwdriver, wrap it with
protective tape to prevent damage.
• Take care not to scratch the body or tear the seat
covers.
• Put on gloves to protect your hands.
1. For '02-04 models with side airbag: Make sure you
have the anti-theft codes for the radio and
navigation system, then write down the
frequencies for the radio preset buttons.
2. Slide the seat all the way forward to access the rear
riser cover.
3. For '99-02 models: On the 8-way power seat,
detach the side and center clips. On the manual
seat and the manual height adjustable seat, detach
both side clips. Then remove the rear riser cover
(A).
Fastener Locations
: Clip
8-way power seat, 3
Except 8-way power seat, 2
A
4. For '03-04 models driver's seat: Detach the clips,
then remove the rear riser cover (A).
Fastener Locations
: Clip, 4
8-way power seat
Manual height adjustable seat
A
A
(cont'd)
20-81