Openers
Hood Opener Cable Replacement
1. Remove the following parts from the left side of the vehicle:
• Inner fender (see page 20-149)
• Kick panel (see page 20-58)
2. Remove the hood latch (A) (see page 20-154), and disconnect the hood opener (B).
Fastener Locations
D
: Clip, 1
E
3. Remove the hood release handle (C) (see page 20-154), and disconnect the hood opener cable.
4. Using a clip remover, detach the clips (D, E) from the body, then remove the hood opener cable from the vehicle.
Take care not to kink the cable.
5. Install the cable in the reverse order of removal, and replace any damaged clips.
20-152
: Clip, 1
A
B
D
E
C