Shift Lever Removal - Honda 2004 Odyssey Service Manual

Hide thumbs Also See for 2004 Odyssey:

Table of Contents

Automatic Transmission

Shift Lever Removal

SRS components are located in this area. Review the

SRS component locations, 2002 model (see page 23-19),

2003-2004 models (see page 23-20), and the

precautions and procedures (see page 23-21) in the SRS

before performing repairs or service.

1. Remove the steering column upper and lower

covers (see page 17-25).

2. Shift the transmission into the N position.

3. Remove the nut (A) securing the shift cable end (B),

then separate the shift cable (C) from the shift lever

assembly (D).

4. Rotate the socket holder (E) on the shift cable

counterclockwise a quarter turn, then slide the

holder to remove the shift cable from the shift cable

bracket (F).

NOTE: Do not remove the shift cable by twisting

the shift cable guide (G).

5. Disconnect the shift lock solenoid connector (A)

and the park pin switch connector (B).

6. Remove the three bolts (C) securing the shift lever

assembly, then remove the shift lever assembly (D).

Table of Contents