Honda 2004 Odyssey Service Manual page 1316

ABS DTC 31, 32, 33, 34, 35, 36, 37, 38:
Solenoid
1. Verify the DTC.
Is DT C 54 indicated?
YES Do the appropriate troubleshooting for DTC
54.
NO Go to step 2.
2. Turn the ignition switch OFF.
3. Disconnect the modulator unit connector and ABS/
TCS control unit connector C (12P).
4. Check for continuity between appropriate ABS/TCS
control unit connector C (12P) solenoid circuit
terminal and body ground (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
FL-OUT (YEL/BLU)
RR-OUT (YEL/WHT)
RR-IN (RED/WHT)
FL-IN (RED/BLU)
Wire side of female terminals
Is there continuity?
YES Repair short to body ground in the
appropriate solenoid circuit wire between the ABS/
TCS control unit and the modulator unit.
NO Go to step 5.
Appropriate Terminal
No. 11
No. 6
No. 9
No. 4
No. 8
No. 3
No. 10
No. 5
RL-OUT (YEL/GRN)
FR-OUT (YEL/BLK)
FR-IN (RED/BLK)
RL-IN (RED/GRN)
5. Connect the modulator unit connector.
6. Check for continuity between appropriate ABS/TCS
control unit connector C (12P) solenoid circuit
terminal and body ground (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
FL-OUT (YEL/BLU)
RR-OUT (YEL/WHT)
RR-IN (RED/WHT)
FL-IN (RED/BLU)
Wire side of female terminals
Is there continuity?
YES Replace the modulator unit.
NO Go to step 7.
7. Disconnect the modulator unit connector.
Appropriate Terminal
No. 11
No. 6
No. 9
No. 4
No. 8
No. 3
No. 10
No. 5
RL-OUT (YEL/GRN)
FR-OUT (YEL/BLK)
FR-IN (RED/BLK)
RL-IN (RED/GRN)
(cont'd)
19-115