Honda 2004 Odyssey Service Manual page 1235

Conventional Brake Components
Parking Brake Shoe Replacement
(cont'd)
9. Install the tension pin (A), retainer spring (B), and
retainer (C) of the forward brake shoe (D).
D
A
B
C
10. Install the upper return springs (A).
11. Install the rear brake disc/drum and rear brake
caliper.
12. Do the major parking adjustment brake (see step 1
on page 19-8).
19-34 19-34
A
Parking Brake Shoe Lining Break-in
'02-04 Models
NOTE: Do brake linings surface break-in when replacing
shoes with new linings and/or new rear brake disc/
drum.
Perform this operation in a safe area.
1. Park the vehicle on a firm, level surface.
2. Do the major parking brake adjustment (see step 1
on page 19-8).
3. Do the minor parking brake adjustment (see step 1
on page 19-8).
4. Press the parking brake pedal two to four clicks.
5. Drive the vehicl for 400 m (1/4 mile) at no more
than 31 mph (50 km/h).
6. Stop the vehicle, and release the parking brake for
5 10 minutes to allow the drums to cool.
7. Repeat steps 4 through 6 three more times.
8. Check the parking brake pedal adjustment (see
page 19-7).