Honda 2004 Odyssey Service Manual page 767

Automatic Transmission
Transmission Installation (cont'd)
45. Connect the ATF cooler hoses (A) to the ATF cooler
lines (B) (see page 14-156). Clamp the ATF cooler
hose with the clamp (C) on the starter.
C
46. Install the battery base bracket and battery base.
47. Install the battery cable clamps, connector, and
relay bracket on the battery base.
48. Install the battery tray and battery, then secure the
battery with its hold-down bracket.
49. Install the intake air duct, resonator cover, and air
cleaner housing assembly.
50. Install the engine covers.
14-154
51. Refill the transmission with ATF (see step 5 on page
52. Connect the battery positive terminal, then connect
53. Set the parking brake. Start the engine, and shift
54. Check the shift lever operation, A/T gear position
55. Check and adjust the front wheel alignment (see
56. Reinstall the support rod of the hood to the proper
B
A
57. Start the engine and let it reach normal operating
58. Do the PCM idle learn procedure (see page 11-202).
59. Do a road test (see page 14-125).
60. Enter the anti-theft code for the radio, then enter
61. Loosen the front mount nut after the road test, then
14-137).
the negative terminal.
the transmission through all gears three times.
indicator operation, and shift cable adjustment.
page 18-5).
location, and secure the windshield washer
reservoir opening with the bolt.
temperature (the radiator fan comes on) with the
transmission in the P or N position, then turn it off
and check the ATF level (see page 14-136).
the radio station presets, and set the clock.
retighten the nut to the specified torque.
12 x 1.25 mm
54 N·m (5.5 kgf·m,
40 lbf·ft)