Inner Fender Replacement; Fenderwell Trim Replacement - Honda 2004 Odyssey Service Manual

Fenderwell

Inner Fender Replacement

NOTE: Take care not to scratch the body.
1. Remove the inner fender as shown.
2. Install the inner fender in the reverse order of
removal, and note these items:
• Replace any damaged clips.
• Push the clips into place securely.
Fastener Locations
A : Bolt, 1
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
C : Clip, 6 D : Clip, 3
D
FRONT
BUMPER
INNER FENDER
B : Screw, 4
C
C
C
C
C
B
C
A
B
D
B
B
D
FRONT SPLASH GUARD
(For some models)

Fenderwell Trim Replacement

1. Remove the fenderwell trim (A) by carefully pulling
it out.
NOTE: The steel core (B) in the fenderwell trim
cannot be restored to it original shape once it is
bent. Replace the fenderwell trim when the steel
core is bent.
A
A
2. Clean the body bonding surface with a sponge
dampened in alcohol. After cleaning, keep oil,
grease and water from getting on the clean surface.
3. Apply clear sealant (C) into the channel of the
fenderwell trim from end to end.
Sealant: Cemedine P/N 08712-0004, or equivalent
4. Install the fenderwell trim.
5. Scrape or wipe the excess sealant off with a towel.
To remove sealant from a painted surface, wipe
with a soft shop towel dampened in alcohol.
B
C
20-149 20-149