Honda 2004 Odyssey Service Manual page 1374

4. Disconnect the cylinder rod (A). Release the
retainer clip (B), then remove the lock cylinder (C).
C
A
5. Remove the screw, then separate the lock cylinder
(A) and cylinder switch (B).
Fastener Location
: Screw, 1
A
B
B
6. Disconnect the cylinder switch connector (A), and
detach the harness clip (B), and release the cylinder
switch harness (C) from the harness clip (D).
B
D
7. Remove the access cap (A), and remove the bolts
securing the outer handle protector (B) and outer
handle (C).
Fastener Locations
: Bolt, 3
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
C
A
B
C
(cont'd)
20-9