Table of Contents
Advertisement
Transmission End Cover
End Cover, 3rd Gear, Idler Gear, and 3rd Clutch Installation (cont'd)
6. Set the dial indicator (A) to the countershaft 3rd
gear (B).
7. Measure the countershaft 3rd gear axial clearance
in at least three places, while moving the
countershaft 3rd gear (A).
Use the average as the actual clearance.
If the clearance is out of standard, select the
appropriate 31 x 63.5 mm splined washer in step
16.
Standard:
0.015 0.045 mm (0.0006 0.0018 in.)
A
14-470
A
B
10. Remove the parts that were installed in step 5.
11. Install the special tool onto the mainshaft.
8. Remove the locknut and conical spring washer.
9. Remove the 3rd clutch assembly (A) with the
special tool and a commercially available 3/8-16''
slide hammer (B).
B
07736-A01000B or
07736-A01000A
07GAB-PF50101 or
07GAB-PF50100
A
Advertisement
Chapters
Table of Contents
Troubleshooting
