Honda 2004 Odyssey Service Manual page 963

Automatic Transmission
DTC Troubleshooting (cont'd)
DTC P1750: Mechanical Problem in Hydraulic
Control System of A/T Clutch Pressure
Control Solenoid Valves A and B, or Problem
in the Hydraulic Control System
NOTE: Record all freeze data and review General
Troubleshooting Information (see page 14-247) before
you troubleshoot.
1. Check whether the scan tool or the HDS indicates
another code.
Does the scan tool or the HDS indicate another
code?
YES Perform the Troubleshooting Flowchart for
the indicated code(s). Recheck for code P1750 after
troubleshooting.
NO Go to step 2.
2. Turn the ignition switch OFF.
3. Replace the A/T clutch pressure control solenoid
valves A and B (see page 14-361).
4. Clear the DTC with the scan tool or the HDS.
5. Drive the vehicle for several minutes in 1st, 2nd,
3rd, 4th, and 5th gears in the D position.
6. Recheck for code P1750.
Does the scan tool on the HDS indicate code
P17 50?
YES Replace the transmission.
NO The problem has been corrected.
14-350