Shift Lever Removal - Honda 2004 Odyssey Service Manual

Shift Lever Removal

SRS components are located in this area. Review the
SRS component locations (see page 23-18), and the
precautions and procedures (see page 23-21) in the SRS
before performing repairs or service.
1. Remove the steering column upper and lower
covers (see page 17-25).
2. Shift the transmission into the N position.
3. Remove the nut (A) securing the shift cable end (B),
then separate the shift cable (C) from the shift lever
assembly (D).
D
B
A
G
E
4. Rotate the socket holder (E) on the shift cable
counterclockwise a quarter turn, then slide the
holder to remove the shift cable from the shift cable
bracket (F).
NOTE: Do not remove the shift cable by twisting
the shift cable guide (G).
5. Disconnect the shift lock solenoid connector (A)
and the park pin switch connector (B).
B
A
6. Remove the three bolts (C) securing the shift lever
F
assembly, then remove the shift lever assembly (D).
C
D
C
14-157