Honda 2004 Odyssey Service Manual page 1224

15. Apply Molykote 44MA grease to the brake shoe
ends and opposite edges of the brake shoes shown.
Wipe off any excess. Do not get grease on the
brake lining.
16. Connect the parking brake cable to the parking
brake lever.
Opposite edge of the shoe
Brake shoe ends
(Shoe side ends and backing
plate contact surface)
17. Clean the threaded portions of the adjuster bolt (A)
and nut (B), and coat the threads with grease.
Install the adjuster nut, thermo clip (C), and
connecting rod (D) on the adjuster bolt. To shorten
the adjuster bolt, turn the adjuster nut.
C
B
A
F
18. Install the self-adjuster lever (E) on the brake shoe.
19. Hook the self-adjuster springs (F) to the lever first,
then to the brake shoe.
20. Install the adjuster assembly between the brake
shoe and parking brake lever. Note the installation
direction.
21. Fit the top of the brake shoes on the wheel cylinder
pistons. Connect the upper return spring (G). Note
the installation direction.
22. Hook the lower return spring (H) on the brake shoes.
D
G
E
H
(cont'd)
19-23