Countershaft Reverse Selector Hub And 4Th Gear Removal - Honda 2004 Odyssey Service Manual

Countershaft Reverse Selector Hub and 4th Gear Removal

1. Remove the reverse selector hub (A) and the 5th
gear (B) from the countershaft with a press. Place a
shaft protector (C) between the countershaft and
press to prevent damaging the countershaft.
NOTE: Some reverse selector hubs are not press-
fitted, and can be removed without using a press.
C
A
B
2. Remove the needle bearing, snap ring, 35 x 47 x
7.8 mm distance collar, 31 mm cotters, 35 x 47 x
45.6 mm distance collar, and 31 mm cotters from
the countershaft.
3. Remove the 1st gear (A) and 4th gear (B) from the
countershaft with a press. Place a shaft protector
(C) between the countershaft and press to prevent
damaging the countershaft.
C
B
A
14-445