Honda 2004 Odyssey Service Manual page 998

37. Install the harness cover (A) on bracket (B).
6 x 1.0 mm
A
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
B
G
38. Connect the transmission range switch connector
(C), then install it on its connector bracket (D).
Install the harness clamp (E) on the bracket (F).
39. Connect the output shaft (countershaft) speed
sensor connector (G).
40. Connect the connectors to the torque converter
solenoid valve (A) and the shift solenoid valve B.
B
41. Connect the connectors to the A/T clutch pressure
control solenoid valves A and B, then install the
harness clamps (C) on the brackets (D).
C
B
C
D
F
42. Connect the 8P connector (E), then install it on its
connector bracket (F).
E
43. Connect the connectors to the shift solenoid valves
A and C, A/T clutch pressure control solenoid valve
C (B), 4th clutch transmission fluid pressure switch
(D), and input shaft (mainshaft) speed sensor (E),
then install the harness clamps (F) on the brackets
(G).
A
A
C
A E
B
D
C
D
F
G
F
B
F
E
E
D
(cont'd)
14-385