Table of Contents
Advertisement
23. Turn the ignition switch OFF.
24. Disconnect PCM connector A (32P).
25. Check for continuity between PCM connector
terminal A14 and body ground.
PCM CONNECTOR A (32P)
D5 IND (GRN/BLK)
Wire side of female terminals
Is there continuity?
YES
Repair open in the wire between PCM
connector terminal A14 and the gauge assembly.
NO
Check for loose terminal fit in the PCM
connectors. Check the transmission range switch. If
necessary, substitute a known-good PCM and
recheck.
14-401
Advertisement
Chapters
Table of Contents
Troubleshooting
