Mirror Holder Replacement - Honda 2004 Odyssey Service Manual

Mirror Holder Replacement

1. Push in the bottom of the mirror holder (A).
E
D
A
C
D
E
C
A
C
B
2. Insert a flat-tip screwdriver wrapped with a shop
towel at the bottom gap between the mirror holder
and mirror (B). Push the mirror holder upward to
release the hooks (C, D) from the actuator adapter
plate (E) while holding the mirror holder.
3. If equipped, disconnect the mirror defogger
terminals (A).
A
E
A
4. Install the mirror holder in the reverse of the
removal, and note these items:
• If equipped, make sure the terminals are plugged
in properly.
• Push the mirror holder downward to lock in the
hooks.
• Push in the bottom of the mirror fully before you
push on the mirror holder.
• Check the operation of the actuator.
20-35