Honda 2004 Odyssey Service Manual page 1572

Heater Control Panel Removal and
Installation
1. Remove the center panel with the heater control
panel (see page 20-70).
2. Remove the self-tapping screws and the heater
control panel (A) from the center panel (B).
A
B
3. Install the control panel in the reverse order of
removal. After installation, operate the control
panel controls to see whether it works properly.
4. Run the self-diagnosis function to confirm that
there are no problems in the system (see page 21-
8).
Heater Control Panel Disassembly
and Reassembly
1. Remove the fan switch (A) and temperature control
dial (B), then remove the front panel (C). Remove
the mode control switch (D), recirculation control
switch (E), rear defogger switch (F) and A/C switch
(G) buttons.
D
E
C
A
2. Reassemble the control panel in the reverse order
of removal.
F
B
G
21-41 21-41