Honda 2004 Odyssey Service Manual page 1482

8. If necessary, remove the seat-back pad, then
remove the seat-back damper (A) from the seat-
back frame (B).
Fastener Locations
: Bolt, 4
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
A
9. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles when installing a seat-back
cover, make sure the material is stretched evenly
over the pad before securing the hook and clips.
• Replace any clips (A) you removed with new
ones using commercially available upholstery
ring pliers (B).
B
A
B
Seat Cushion Cover
1. Remove the second row seat.
2. Remove the recline cover, both sides (see page 20-
109).
3. Release the clips (A) and hooks (B) from under the
seat cushion, then loosen the seat cushion cover
(C).
A
4.
Remove the seat belt buckles (see step 4 on page
23-10).
C
B
(cont'd)
20-117