Honda 2004 Odyssey Service Manual page 1317

ABS/TCS Components
DTC Troubleshooting (cont'd)
8. Connect the appropriate modulator unit connector
solenoid circuit terminal to body ground with a
jumper wire (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
MODULATOR UNIT CONNECTOR
RR-IN (RED/WHT)
FL-IN FR-OUT
(RED/ (YEL/BLU)
BLU)
RR-OUT
(YEL/
WHT)
JUMPER WIRE
Terminal side of female terminals
19-116
Appropriate Terminal
No. 11
No. 19
No. 14
No. 22
No. 13
No. 21
No. 12
No. 20
RL-IN (RED/GRN)
FR-IN
FR-OUT
(RED/
(YEL/BLK)
BLK)
RL-OUT
(YEL/GRN)
9. Check for continuity between the appropriate ABS/
TCS control unit connector C (12P) solenoid circuit
terminal and body ground (see table).
DTC
31: FR-IN
32: FR-OUT
33: FL-IN
34: FL-OUT
35: RR-IN
36: RR-OUT
37: RL-IN
38: RL-OUT
ABS/TCS CONTROL UNIT CONNECTOR C (12P)
FL-OUT (YEL/BLU)
RR-OUT (YEL/WHT)
RR-IN (RED/WHT)
FL-IN
(RED/
BLU)
Wire side of female terminals
Is there continuity?
YES Go to step 10.
NO Repair open in the appropriate solenoid
circuit wire between the ABS/TCS control unit and
the modulator unit.
10. Remove the jumper wire from the modulator unit
connector.
11. Connect the modulator unit connector.
Appropriate Terminal
No. 11
No. 6
No. 9
No. 4
No. 8
No. 3
No. 10
No. 5
RL-OUT (YEL/GRN)
FR-OUT (YEL/BLK)
FR-IN (RED/BLK)
RL-IN
(RED/
GRN)