Torque Converter Housing
Mainshaft Bearing and Oil Seal Replacement
Special Tools Required
• Adjustable bearing puller, 25 40 mm
07736-A01000B or 07736-A01000A
• Driver 07749-0010000
• Attachment, 62 x 68 mm 07746-0010500
• Attachment, 72 x 75 mm 07746-0010600
1. Remove the mainshaft bearing and oil seal with the
special tools and a commercially available 3/8''-16
slide hammer (A).
A
2. Install the new mainshaft bearing until it bottoms in
the housing with the special tools.
14-438
07736-A01000B or
07736-A01000A
07749-0010000
07746-0010500
3. Install the new oil seal flush to the housing with the
special tools.
07749-0010000
07746-0010600