Front Bumper Removal/Installation - Honda 2004 Odyssey Service Manual

Bumpers

Front Bumper Removal/Installation

NOTE:
• Have an assistant help you when removing the front bumper.
• Take care not to scratch the front bumper and body.
• Put on gloves to protect your hands.
1. Remove the front bulkhead cover (see page 20-142).
2. Remove the front bumper (A):
–1 Remove the bolts (B) and clips (C) securing the front bumper, inner fender (D) and splash shield (E).
–2 Remove the screws (F), then pull both side wheel arch portions of the bumper outward to detach them from
the side clips (G).
–3 With the help of an assistant, pull the front bumper forward to release the hooks (H) from both corner upper
beams (I), then remove the front bumper.
Fastener Locations
B : Bolt, 2
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m,
7.2 lbf·ft)
20-128
F : Screw, 2 C
H
I
D
F
B
C
C
A
: Clip, 4
E
C
C
H
I
D
F
B
G