Honda 2004 Odyssey Service Manual page 849

Transmission End Cover
End Cover and Idler Gear Installation (cont'd)
29. Install the transmission range switch (A) gently on
the control shaft (B), then secure it with the bolts.
Take care not to move the transmission range
switch when tightening the bolts.
C
A
D
30. Install the transmission range switch cover (C);
install the harness clamp (D) on the clamp bracket
(E); install the harness clamp (F) on the end cover
(G).
31. Install the ATF cooler lines and new sealing
washers. Tighten the line fittings to 28 N·m (2.9
kgf·m, 21 lbf·ft).
32. Install the breather tube.
33. Install the ATF dipstick.
14-236
6 x 1.0 mm
12 N·m(1.2 kgf·m,
8.7 lbf·ft)
F
B
G
E