Honda 2004 Odyssey Service Manual page 752

14. Disconnect the connectors from the 3rd clutch
pressure switch (A), mainshaft speed sensor (B),
and A/T clutch pressure control solenoid valves A
and B (C), then remove the harness clamps from
the clamp brackets.
15. Disconnect the connector from the torque
converter clutch solenoid valve/shift solenoid valve
A (A), then remove the connector from harness
cover (B).
B
A
16. Remove the bolt securing connector bracket (C).
17. Remove the bolt securing the harness cover, then
push the harness cover rearward to remove it from
the transmission hanger (D).
C
B
A
C
D
18. Disconnect the connectors from the countershaft
speed sensor (A), and 2nd clutch pressure switch
(B).
B
19. Remove the A/T gear position switch connector (C)
from the connector bracket (D), then disconnect it.
20. Remove the nut (A) from the front mount, and
disconnect the vacuum tube (B) at the joint (C).
A
B
C
C
D
A
(cont'd)
14-139