Honda 2004 Odyssey Service Manual page 1442

5. Disconnect the dashboard wire harness connectors (A), SRS wire harness connector (B) cruise control connector
(C) and keyless entry control unit connector (D). Remove the data link connector (DLC) (E) from the steering
hanger beam.
Fastener Locations
: Harness clip and connector clip
F
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
B
A
F
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
6. Remove the ground bolts (F).
7. Detach all of the harness and connector clips. With navigation system, remove the GPS antenna harness (G) from
the steering hanger beam.
A
E
G
A
A
C
F
6 x 1.0 mm
9.8 N·m (1.0 kgf·m,
7.2 lbf·ft)
B
A
B
A
D
A
A
(cont'd)
20-77