Honda 2004 Odyssey Service Manual page 698

9. Shift to P or N position.
10. Measure the voltage between the B14 and B20 or
B22 terminals.
PCM CONNECTOR B (25P)
LG2 (BRN/BLK)
LG1 (BRN/BLK)
Wire side of female terminals
Is there voltage?
YES Repair open in the wire between the B14
terminal and the A/T gear position switch.
NO Go to step 11.
11. Shift to D3 position.
12. Measure the voltage between the D8 and B20 or
B22 terminals.
PCM CONNECTORS
B (25P)
LG2 (BRN/BLK)
LG1 (BRN/BLK)
Wire side of female terminals
Is there voltage?
YES Repair open in the wire between the D8
terminal and the A/T gear position switch.
NO Go to step 13.
ATP NP (BLU/WHT)
D (16P)
ATP D3
(PNK)
13. Shift to 2 position.
14. Measure the voltage between the D14 and B20 or
B22 terminals.
PCM CONNECTORS
B (25P)
LG2 (BRN/BLK)
LG1 (BRN/BLK)
Wire side of female terminals
Is there voltage?
YES Repair open in the wire between the D14
terminal and the A/T gear position switch.
NO Go to step 15.
15. Shift to 1 position.
16. Measure the voltage between the D15 and B20 or
B22 terminals.
PCM CONNECTORS
B (25P)
LG2 (BRN/BLK)
LG1 (BRN/BLK)
Wire side of female terminals
Is there voltage?
YES Repair open in the wire between the D15
terminal and the A/T gear position switch.
NO Check for loose terminal fit in the PCM
connectors. If necessary, substitute a known-good
PCM and recheck.
D (16P)
ATP 2 (BLU)
D (16P)
ATP 1 (BRN)
14-85