5. Pull back the edge of the seat cushion cover all the
way around, and release the clips (A). On
some '01 model seat cushions, there are two
additional clips (B) that must be released near the
child seat tether anchors. Then remove the seat
cushion cover (C).
'99-01 models
A
'02-04 models (Leather seat)
A
B
'02-04 models (Non-leather seat)
A
6. Install the cover in the reverse order of removal,
and note these items:
• To prevent wrinkles when installing a seat
cushion cover, make sure the material is
stretched evenly over the pad before securing
the clips and hooks.
• Replace any clips (A) you removed with new
ones (A) using commercially available upholstery
ring pliers (B).
A
B
20-115