Honda 2004 Odyssey Service Manual page 1418

15. With a sponge, apply a light coat of body primer to
the original adhesive remaining around the sliding
door glass opening flange. Let the body primer dry
for at least 10 minutes:
• Do not apply glass primer to the body, and be
careful not to mix up glass and body primer
sponges.
• Never touch the primed surfaces with your hands.
: Apply body primer here.
16 mm (0.63 in.)
20 mm (0.79 in.)
19 mm (0.75 in.)
12 mm
(0.47 in.)
16. Before filling a cartridge with adhesive, cut a ''V'' in
the end of the nozzle (A) as shown.
A
10 mm
(0.39 in.)
20 mm
(0.79 in.)
20 mm (0.79 in.)
10 mm
(0.39 in.)
10 mm (0.39 in.)
7 mm (0.27 in.)
17. Pack adhesive into the cartridge without air pockets
to ensure continuous delivery. Put the cartridge in a
caulking gun, and run a bead of adhesive (A)
around the edge of the glass (B) as shown. Apply
the adhesive within 30 minutes after applying the
glass primer. Make a slightly thicker bead at each
corner.
2 mm (0.08 in.)
A
13 mm
(0.51 in.)
8 mm (0.31 in.)
1 mm (0.04 in.)
A
A
B
A
1 mm
(0.04 in.)
A
B
1 mm (0.04 in.)
B
B
B
(cont'd)
20-53