Shafts and Clutches
Countershaft Reverse Selector Hub, 3rd Gear, and 1st Gear Removal
1. Remove the reverse selector hub (A) and the 4th
gear (B) from the countershaft with a press. Place a
shaft protector (C) between the countershaft and
press to prevent damaging the countershaft.
NOTE: Some reverse selector hubs are not press-
fitted, and can be removed without using a puller.
14-210
C
A
B
2. Remove the needle bearing, snap ring, distance
collar, and 31 mm cotters from the countershaft.
3. Remove the 1st gear (A) and 3rd gear (B) together
from the countershaft with a press. Place a shaft
protector (C) between the countershaft and press to
prevent damaging the countershaft.
C
B
A