Honda 2004 Odyssey Service Manual page 1437

Dashboard
Passenger's Side Vent Removal/
Installation
NOTE:
• When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the
related parts to prevent damage.
• Take care not to scratch the dashboard and related
parts.
1. Remove the passenger's side vent (A).
–1 Carefully insert a flat-tip screwdriver next to
the right pivot (B).
–2 Release the pivot by prying on the vent.
–3 Remove the vent by releasing the left pivot
portion (C).
A
C
2. Before reinstalling, make sure the left pivot
bushing (D) is installed on the side vent housing (E)
securely.
3. Reinstall the left pivot portion of the vent to the
bushing first, then push the right pivot portion into
place securely.
20-72 20-72
D
E
B
Beverage Holder Base Removal/
Installation
NOTE:
• Take care not to scratch the dashboard and related
parts.
• Put on gloves to protect your hands.
1. Make sure you have the anti-theft codes for the
radio and the navigation system, then write down
the frequencies for the preset buttons.
2. Remove these items:
• Center lower console (see page 20-68)
• Center panel (see page 20-70)
• Audio unit (see page 22-159)
• Display unit (with navigation system) (see page
22-385)
3. Remove the beverage holder base (A).
–1 Detach the hook (B) from under the beverage
holder (C).
–2 Pull the beverage holder out.
–3 Remove the screws (D, E).
–4 Remove the beverage holder base from the
center lower console opening.
Fastener Locations
D
: Screw, 3 E
: Screw, 2
C
D
4. Install the beverage holder base in the reverse
order of removal, and enter the anti-theft code for
the radio and the navigation system, then enter the
customer's radio station presets.
B
D
A
E
E
D