Honda 2004 Odyssey Service Manual page 950

7. Disconnect PCM connector D (16P).
8. Turn the ignition switch ON (II).
9. Measure the voltage between PCM connector
terminals D5 and B20 or B22.
PCM CONNECTORS
B (25P)
LG1 (BRN/YEL) LG2 (BRN/YEL)
Wire side of female terminals
Is there battery voltage?
YES Check for loose terminal fit in the PCM
connectors. If necessary, substitute a known-good
PCM and recheck.
NO Check for blown No. 6 (15A) fuse in the
driver's under-dash fuse/relay box. If the fuse is OK,
repair open in the wire between PCM connector
terminal D5 and the driver's under-dash fuse/relay
box, between PCM connector terminals B20 and
B22, and ground (G101), or repair poor ground
(G101).
VB SOL (BLK/YEL)
D (16P)
14-337