Honda 2004 Odyssey Service Manual page 1089

Transmission End Cover
End Cover, 3rd Gear, Idler Gear, and 3rd Clutch Installation (cont'd)
53. Connect the 3rd clutch pressure switch connector
(A) and A/T wire harness ground terminal (B) on the
connector bracket (C), then install the clips (D) on
the bracket (E).
6 x 1.0 mm
12 N·m (1.2 kgf·m, 8.7 lbf·ft)
G
H
F
C
54. Install the switch cover (F).
55. Install the ATF temperature sensor (G) with the new
O-ring (H), then secure the harness with the bolts.
Connect the sensor connector to the A/T wire
harness connector, then install it on the connector
bracket (C).
56. Install the dipstick.
14-476
6 x 1.0 mm
9.8 N·m
(1.0 kgf·m, 7.2 lbf·ft)
A
D
B
D
E