Honda 2004 Odyssey Service Manual page 985

Automatic Transmission
Transmission Removal (cont'd)
27. Remove the nut (A) from the front mount (B), and
remove the ground cable (C) from the engine.
C
B
28. Lift and support the engine with engine support
hanger (A) and engine balancer bar (B). Attatch the
front arm (C) to the front cylinder head with a
spacer (D) and the 10 x 1.25 mm bolt (E). Attatch the
rear arm (F) the rear cylinder head with the
8 x 1.25 mm bolt (G).
A
(07XAA-001030A)
C
E
F
14-372
A
F
G
B
(VSB02C000019)
29. Remove the oxygen sensor connectors (B) from
their connector brackets (C), and remove the
harness from the clamps (D).
E
C
30. Remove the exhaust pipe A and three-way catalytic
converter (E).
31. Remove the spring pins (A) and castle nuts (B), and
separate the lower arms (C) from the knuckles (D)
(see page 18-17).
A
B
D
C
32. Put a 6 mm Allen wrench (E) in the top of the joint
pin (F), and remove the nut (G), then separate the
stabilizer link (H).
B
C
A
D
B
E
G
H
F