7. Carefully raise the front subframe with the jack.
8. Install the front stiffener plates (A).
A
A
74 N·m (7.5 kgf·m, 54 lbf·ft)
9. Install the rear stiffener plates (A) and tighten the
mounting bolts to the specified torque.
117 N·m (11.9 kgf·m, 86.1 lbf·ft)
10. Tighten the four 14 mm special bolts (A) to
specified torque.
A
103 N·m (10.5 kgf·m, 75.9 lbf·ft)
11. Lower the jack and remove the wood block.
A
A
A
103 N·m (10.5 kgf·m,
75.9 lbf·ft)
(cont'd)
17-45