19. Disconnect the connectors from the torque
converter clutch solenoid valve (A) and shift
solenoid valve B.
B
20. Remove the transmission range switch connector
(A) from the connector bracket (B).
F
H
E
21. Disconnect the transmission range switch
connector, then remove the harness clamp (C) from
the bracket (D).
22. Disconnect the connector from the output shaft
(countershaft) speed sensor (E).
23. Remove the bolts securing the harness cover (F),
harness clamp (G), and bracket (H).
24. Remove the primary heated oxygen sensor
(Primary HO2S) connector (A) from its connector
bracket (B).
A
C
25. Disconnect the Primary HO2S connector (A), and
remove the Primary HO2S harness from the
harness clamp (C).
G
26. Remove the transmission housing mounting bolts
(3).
A
B
D
C
A
B
14-371
(cont'd)