Honda 2004 Odyssey Service Manual page 757

Automatic Transmission
Transmission Removal (cont'd)
43. Line up the slots in the arms with the bolt holes on
the corner of the jack base, then attach the adapter
to the jack base with the bolts (A) that came with
the jack. Tighten the bolts securely.
A
44. Raise the jack to vehicle height, then attach the
adapter to the front subframe by sliding the
adapter's nut plates (B), between the subframe and
the body.
B
45. Insert the nut plate bolts through the holes in the
adapter and the subframe; then thread the bolts (C)
into the nut plates and tighten them to 54 N·m (5.5
kgf·m, 40 lbf·ft).
14-144
EQS07ODSY0
C
54 N·m
(5.5 kgf·m, 40 lbf·ft)
46. Remove the 12 x 1.25 mm bolts (A), subframe
mounting bolts (4) (B), and the stiffeners (C), then
lower the front subframe (D).
D
C
B
A
B
47. Hang the steering gearbox on passenger side with
a rope to the body.
48. Remove the transmission lower mounts.
C
B
A
B