Honda 2004 Odyssey Service Manual page 1518

Fuel Fill Door Opener Cable Replacement
For '02-04 models: SRS components are located in this area. Review the SRS component locations, '02 model (see
page 23-19), '03-04 models (see page 23-20), and the precautions and procedures (see page 23-21) before performing
repairs or service.
1. Remove these items:
• Front door sill trim, left side (see page 20-58)
• Sliding door sill trim, left side (see page 20-58)
• Rear side trim panel (see page 20-60)
• Third row seat belt retractor (see page 23-11)
• Quarter plastic cover (see page 20-6)
2. Pull the carpet back as necessary (see page 20-65).
3. Disconnect the fuel fill door opener cable (A) from the opener (B) (see step 4 on page 20-156).
Fastener Locations
C : Clip, 2 D : Cushion tape, 2
F
4. Release the opener cable from the clips (C, E, F) and remove the cable cushion (D), then remove the fuel fill door
latch (G) from the body.
5. Install the cable in the reverse order of removal, and replace any damaged clips.
6. Check the operation of the sliding door; verify that the left sliding door locks when the fuel filler door release is
pulled.
E : Clip, 1
G
F : Clip, 1
D
F
E
D
A
C
C
B
20-153